How do you determine the weight of a hot rolled steel plate without a calculator? This article provides a comprehensive weight chart for steel plates ranging from 0.35mm to 200mm in thickness. By referencing this chart, you can quickly find the theoretical weight in kilograms per meter for various steel plate sizes, ensuring accurate material planning and inventory management. Explore the detailed chart to simplify your steel plate calculations and enhance your efficiency in project planning.
The following table presents a comprehensive weight chart for hot rolled (HR) steel plates, ranging from 0.35mm to 200mm in thickness. The weights are calculated theoretically and expressed in kilograms per meter (kg/m). This data is essential for material estimation, load calculations, and cost analysis in various industrial applications.
If your steel size is not in the table below, you can use our steel weight calculator to calculate online.
Grade (mm) | Theoretical weight (kg/m) |
---|---|
0.35 | 2.748 |
0.5 | 3.925 |
0.55 | 4.318 |
0.6 | 4.71 |
0.65 | 5.103 |
0.7 | 5.495 |
0.75 | 5.888 |
0.8 | 6.28 |
0.9 | 7.065 |
1 | 7.85 |
1.2 | 9.42 |
1.3 | 10.205 |
1.4 | 10.99 |
1.5 | 11.775 |
1.6 | 12.56 |
1.8 | 14.13 |
2 | 15.7 |
2.2 | 17.27 |
2.5 | 19.625 |
2.8 | 21.98 |
3 | 23.55 |
3.2 | 25.12 |
3.5 | 27.475 |
3.8 | 29.83 |
3.9 | 30.615 |
4 | 31.4 |
4.5 | 35.325 |
5 | 39.25 |
6 | 47.1 |
7 | 54.95 |
8 | 62.8 |
9 | 70.65 |
10 | 78.5 |
11 | 86.35 |
12 | 94.2 |
13 | 102.05 |
14 | 109.9 |
15 | 117.75 |
16 | 125.6 |
17 | 133.45 |
18 | 141.3 |
19 | 149.15 |
20 | 157 |
21 | 164.85 |
22 | 172.7 |
25 | 196.25 |
26 | 204.1 |
28 | 219.8 |
30 | 235.5 |
32 | 251.2 |
34 | 266.9 |
36 | 282.6 |
38 | 298.3 |
40 | 314 |
42 | 329.7 |
45 | 353.25 |
48 | 376.8 |
50 | 392.5 |
52 | 408.2 |
55 | 431.75 |
60 | 471 |
65 | 510.25 |
70 | 549.5 |
75 | 588.75 |
80 | 628 |
85 | 667.25 |
90 | 706.5 |
95 | 745.75 |
100 | 785 |
105 | 824.25 |
110 | 863.5 |
120 | 942 |
125 | 981.25 |
130 | 1020.5 |
140 | 1099 |
150 | 1177.5 |
160 | 1256 |
165 | 1295.25 |
170 | 1334.5 |
180 | 1413 |
185 | 1452.25 |
190 | 1491.5 |
195 | 1530.75 |
200 | 1570 |
Note: These weights are calculated based on the standard density of steel (7.85 g/cm³ or 7850 kg/m³). Actual weights may vary slightly due to manufacturing tolerances, steel grade variations, and surface treatments. For precise calculations, consult the specific product datasheet or manufacturer specifications.